LeveLine
®
Instruction Manual
10401-01026 Rev D
2.8.1. Checking Memory and Battery Status (logging versions only)
This first thing to do prior to any setup is to check the LeveLine's memory and battery
status. This information is displayed in the 'LeveLine Status' window.
If you are planning a new deployment, ensure there is sufficient memory remaining for the
planned deployment duration at the planned logging rate. If the Logger runs out of memory,
it will stop logging. Also ensure the battery is in good condition.
If your battery is showing below 10% capacity, it is strongly recommended that you
have it replaced by your dealer prior to any further deployment.
for
further details concerning battery life.
2.8.2. Clearing the LeveLine's Memory (logging versions only)
At the bottom of the LeveLine
®
Status window there is a 'Clear Memory' button. If you want
to clear the Logger's memory, click this button.
Please use this feature with care. Once
the Logger's memory has been cleared, all level data stored in the Logger will be
permanently lost.
The 'Clear Memory' button does not clear any of the user settings.
2.8.3. LeveLine
®
Clock Setup (logging versions only)
The clock setup windows are shown below.
The boxes within the window to the left labelled 'Setup Clock' show the current time and
date from your PC. You can override/change this time and date if you want to by directly
altering the values within the boxes.
The boxes within the window to the right labelled 'LeveLine Clock' shows the time and date
of the connected LeveLine
®
Logger.
If the two clocks disagree by more than a few minutes, the 'Update Clock' button will be
coloured red. To synchronise the clock in the LeveLine
®
Logger to the time shown in the
'Setup Clock' window, click the 'Update Clock' button.
2.8.4. LeveLine
®
Site Ident Setup (logging versions only)
The Site Ident windows are shown below bordered in red.
© 2019 Aquaread
®
Ltd.
www.aquaread.com
Page 20 of 90
