LeveLine
®
Instruction Manual
10401-01026 Rev D
If, for instance, your logging rate was every ten seconds, by averaging over 9 readings, you
are applying a running average of 80 seconds to your data.
2.11.7. Applying Corrections
Once you have selected all the corrections you want to apply to your data, click the 'Apply
Correction' button.
LeveLink
™
will take the data loaded into 'Level Logged Data' and 'Baro Logged Data' (if
applicable) tabs, apply the corrections you have chosen, then re-display the corrected data.
If you have chosen to apply Baro correction from a 'Baro file', the barometric pressure data
logged by the Baro Logger must coincide time-wise with the level data you are trying to
correct.
If LeveLink
™
can not match the two files up, an error message will be displayed.
If this occurs, you must either use an appropriate Baro Log file or choose an alternative
method of Baro correction.
2.11.8. Applying Multiple Corrections
Each time you click the 'Apply Correction' button, the corrections you have selected are
applied to the raw data from scratch.
If you have already applied corrections and subsequently change one of the correction
parameters, clicking 'Apply Correction' will remove all corrections previously applied then
re-apply the newly selected corrections to the original raw data.
2.11.9. Exporting Corrected Data
Once data corrections have been applied, the correct data can be exported as a
spreadsheet file or a Google™ Earth file. The original raw data files are not affected and
can therefore be used repeatedly with with various types of correction applied.
© 2019 Aquaread
®
Ltd.
www.aquaread.com
Page 38 of 90
