LeveLine
®
Instruction Manual
10401-01026 Rev D
Altitude (above mean sea level) must be entered in metres.
Inputting an accurate altitude
is important as this is one of the parameters used to calculate level from raw
pressure.
This information is most easily obtained from a GPS. If you are using the LeveLine
®
Logger
in association with an Aquaread
®
LeveLine
®
GPS Meter, the deployment position and
altitude can be uploaded to the Logger from the Meter on site at the touch of a button.
When a deployment position has been transferred, the Logger will output the position in two
additional formats, which are for information only. The first additional position format is
Ordnance Survey (OS) Grid Reference. This grid reference system is only valid within the
United Kingdom. The second additional position format is Universal Transverse Mercator
(UTM) Grid Reference. This grid reference system is valid worldwide.
If the deployment position stored in the Logger differs from the position displayed within the
setup input boxes, the 'Update Position' button will be red. This is to remind you to transfer
settings that have been altered. When the PC and Logger agree, the button will turn grey.
To reset the deployment position in the Logger to all dashes, set all the numbers in the
Latitude and Longitude boxes on the left to zeros and transfer to the Logger.
© 2019 Aquaread
®
Ltd.
www.aquaread.com
Page 22 of 90
