Alcatel-Lucent 7750 SR OS, Interface Configuration Manual, Page: 247 / 444

Interface Configuration
7750 SR OS Interface Configuration Guide Page 247
The no form of this command restores the red-differential-delay defaults.
Default
None
Parameters
red-diff-delay — Specify the maximum red differential delay value.
Values
0 — 25 milliseconds for all other bundles
0 — 50 milliseconds for IMA bundles
down — Transition the link that exceeded the differential delay to a down state (for example, remove
it from the multilink bundle from an operational perspective).
short-sequence
Syntax [ no ] short-sequence
Context config>port>multilink-bundle
Description
This command specifies that the Multi-link Point to Point Protocol (MLPPP) bundle should use short
(12 bit) sequence numbers instead of the default 24-bit sequence number. This command is only valid
for MLPPP bundles.
The no form of this command disables the short-sequence feature.
Default no short-sequence
working-bundle
Syntax [ no ] working-bundle bundle-id
Context config>port>multilink-bundle
Description This command configures a working bundle that is part of this BPGrp.
Parameters bundle-id — Specifies the working multilink bundle in the bundle protection group. The command
syntax must be configured as follows:
Syntax : bundle- type - slot/mda.bundle-num
bundle - PPP or IMA - slot/mda.bundle-num (Creates an MLPPP or IMA bundle.)
bundle : keyword
slot : IOM/MDA slot numbers
bundle-num : 1 — 256
For example:
router1>config>port>ml-bundle> working-bundle bundle-ima-1/1.1