agrifac ENDURANCE User Manual Download Page 105

Page: 105 / 184

MAINTENANCE

Endurance2-UM-2018-20-R0-en-2020420

105

6.10 Hydraulic system

WARNING

Pressure accumulator contains high pressure gas and oil.

Leave any maintenance to a specialist.
Do not weld near a pressure accumulator.
Do not release the pressure by loosening a fitting.

Prevent damage to the system:

•

Work with clean hands and clean tools.

•

Clean the area around a component before you remove it.

•

Cover the area of a removed component.

•

Use the dust cap when you disconnect a hose.

6.11 Hydraulic oil

If the level is too low, the message

“Hydraulic oil level is too low”

appears on

the main screen.

Oil change procedure: in preparation.

6.12 Hydraulic hoses

WARNING

Immediately replace damaged or leaking hydraulic hoses.

Summary of Contents for ENDURANCE

























































































































































































Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands

agrifac ENDURANCE, User Manual

Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands