agrifac ENDURANCE User Manual Download Page 108

Page: 108 / 184

MAINTENANCE

108

Endurance2-UM-2018-20-R0-en-2020420

6.18 Windscreen washer fluid

WARNING

Poor visibility can cause accidents. Keep the tank filled with windscreen wash-
er fluid.

NOTICE

Use commercially available windscreen washer fluid. Use windscreen washer
fluid with antifreeze properties when there is frost. Read and obey the instruc-
tions on the label of the windscreen washer fluid.

Fill the tank [1] with windscreen washer fluid if nec-
essary.

6.19 Windscreen wiper

WARNING

Poor visibility can cause accidents. Replace the wiper blade at least 1x per
year.

Check the condition of the wiper blade [1].
Replace the wiper blade if necessary.

Clean and adjust the windscreen spray noz-
zles [2] if necessary.

Summary of Contents for ENDURANCE

























































































































































































Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands

agrifac ENDURANCE, User Manual

Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands