agrifac ENDURANCE User Manual Download Page 49

Page: 49 / 184

START-UP

Endurance2-UM-2018-20-R0-en-2020420

4.10 Frost

NOTICE

If the sprayer is delivered when there is frost, there can be antifreeze in the
tanks and pipes. Drain the antifreeze before you fill the sprayer with water.
Dispose of the antifreeze in accordance with the national legislation.

4.11 Start-up after winter storage

Do the points under “After winter storage” in the Maintenance schedule (



Install the fill pump and the spray pump if they were removed from the machine for winter
storage.

Secure all pipes.

If the batteries were removed from the machine for winter storage: install the batteries and
connect the cables.

Start the engine (



and



Fill the tanks with clean water.

Check all sprayer functions.

Summary of Contents for ENDURANCE

























































































































































































Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands

agrifac ENDURANCE, User Manual

Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands