agrifac ENDURANCE, User Manual

Page: 103 / 184

MAINTENANCE
Endurance2-UM-2018-20-R0-en-2020420
103
6.7 Correcting the wheel alignment
NOTICE Prevent excessive tyre wear: correct the wheel alignment daily.
1.
Start the engine.
2. In FIELD MODE: select the four-wheel steering (pushbutton [8A],  65 ).
3. Turn the steering wheel clockwise or anticlockwise against the stop.
4. Keep pulling the steering wheel against the stop.
5. Look at the wheels. Wait until all wheels have stopped turning.
6. The wheel alignment has been corrected.
6.8 Lubrication
Lubricate the machine according to the Maintenance schedule (

95 ).
Use the products specified in section 6.5 (

92 ).
Machine without an automatic lubrication system (for grease):
•
Lubricate the machine 1x per 50 operating hours.
•
Lubricate the spray boom 1x per 50 operating hours.
•
Use a grease gun for parts with a grease nipple.
•
Use a brush for parts without a grease nipple.
Machine with an automatic lubrication system (for grease):
•
Lubricate the parts that are not connected to the system 1x per 50 operating hours.
•
Lubricate the spray boom 1x per 50 operating hours.
•
Use a grease gun for parts with a grease nipple.
•
Use a brush for parts without a grease nipple.
Spray boom:
The spray boom is not connected to the automatic lubrication system.
1.
Unfold the spray boom.
2. Lower the spray boom down.
3. Turn the engine off and take the ignition key
with you.
4. Lubricate the spray boom with a grease gun.
Example