agrifac ENDURANCE User Manual Download Page 22

Page: 22 / 184

SAFETY

Endurance2-UM-2018-20-R0-en-2020420

Label

Instruction

Order number

WARNING

Rotating fan.

Keep your hands away.

8461220

WARNING

Falling

Do not ride on machine.

8461242

Label on the AirFlowPlus-boom (option).
Label near the HTA unit (option).

WARNING

LOUD NOISE

Prevent hearing loss.

Use ear protection.

8461219.1

WARNING

Use Personal Protective Equipment:

•

Chemical resistant gloves.

•

Chemical resistant overall.

•

Respiratory protection.

8461257

WARNING

Hazardous substances.

Prevent serious health problems caused by
breathing hazardous substances.

Read and obey the instructions for the cab air
filter.

8461258

WARNING

Use Personal Protective Equipment specified by
the spray product manufacturer (refer to the label
and the Safety Data Sheet).

For example:

•

Chemical resistant gloves.

•

Chemical resistant boots.

•

Chemical resistant overall.

•

Chemical resistant apron.

•

Safety goggles.

•

Face shield.

•

Respiratory protection.

•

Head protection.

8461213.1

Summary of Contents for ENDURANCE

























































































































































































Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands

agrifac ENDURANCE, User Manual

Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands