agrifac ENDURANCE, User Manual

Page: 91 / 184

MAINTENANCE
Endurance2-UM-2018-20-R0-en-2020420
91
6.4 Electric welding
WARNING
Do not weld near any part of the air conditioning.
Do not weld near a pressure accumulator.
Protect rubber and plastic parts.
•
Disconnect the negative battery cable before
you do any electric welding.
•
Put the earth clamp [1] as close as possible
to the weld location [2].
•
Check that there are no bearings between
the earth clamp and the weld location.
In case of an EU stage V engine:
1.
Turn the engine off and take the ignition key with you.
2.
Wait 10 minutes. While you wait:
•
Data is stored in the engine control unit.
•
The AdBlue is circulated to cool the AdBlue injector.
•
The AdBlue lines are emptied to prevent frost damage.
3.
Disconnect the negative (–) battery cable.
NOTICE If you disconnect the negative battery cable too soon, a system error
will occur and the engine will no longer start. In this case, you need a
service engineer of the engine manufacturer to reset the system.
In case of an uncertified engine
(optional for Australia)
:
1.
Turn the engine off and take the ignition key with you.
2.
Wait 2 minutes.
While you wait, data is stored in the engine control unit.
3.
Disconnect the negative (–) battery cable.
NOTICE
If you disconnect the negative battery cable too soon, a system error
will occur and the engine will no longer start. In this case, you need a
service engineer of the engine manufacturer to reset the system.