agrifac ENDURANCE, User Manual

Page: 127 / 184

MAINTENANCE
Endurance2-UM-2018-20-R0-en-2020420
127
6.35 Pressure filter
Cleaning / replacing the filter elements:
1. Increase the track width if necessary.
2. Turn the engine off.
3. Turn the ignition on.
4.
WARNING. Make sure that you do not get
spray liquid on your body. Close the electric
valves before you remove the filter cap:
1. Briefly press the button [1].
2. Wait until the LED in the button comes on:
the electric valves are closed.
5.
WARNING.
Use Personal Protective Equip-
ment specified by the spray product manu-
facturer (refer to the label and the Safety Da-
ta Sheet).
6.
Open the drain valve [2] and collect the
spray liquid in a bucket [3].
7. Close the drain valve [2].
8. Pour the spray liquid into the spray tank.
9.
Loosen the filter cap [5] with the hook
wrench [4].
10.
Remove the filter cap [5].
11. Remove and clean the filter elements [6].
Replace the filter elements [7] if necessary.
12. Put the parts back into the filter housing.
13. Tighten the filter cap with the hook wrench.
14. Briefly press the button [1]. The LED in the
button goes off: the electric valves go back
to their initial position.
15.
Dispose of used filter elements in accord-
ance with the national legislation.