agrifac ENDURANCE User Manual Download Page 20

Page: 20 / 184

SAFETY

Endurance2-UM-2018-20-R0-en-2020420

Label

Instruction

Order number

WARNING

Toxic chemicals.

Breathing the vapours in the spray tank can cause dizziness,
loss of consciousness, death or serious injury.

Before you go into the spray tank:
1.  Drain the contents.
2.  Rinse the inside with clean water.
3.  Drain the water.
4.  Open the tank lid.
5.  Wait 4 hours to let the vapours escape.
6.  Use a respirator, appropriate for the latest spray product

used.

7. Let an assistant near the spray tank monitor your condi-

tion.

8461209

WARNING

Toxic chemicals.

This water can contain toxic chemicals.

Do not drink this water.

8461211

Label near the suction filter and pressure filter.

WARNING

Make sure that you do not get spray liquid on your body.

Close the electric valves before you remove the filter cap.

8461236

WARNING

Rotating parts.

Keep your hands away when the engine is running.

8461214

Summary of Contents for ENDURANCE

























































































































































































Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands

agrifac ENDURANCE, User Manual

Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands