agrifac ENDURANCE User Manual Download Page 62

Page: 62 / 184

OPERATION

Endurance2-UM-2018-20-R0-en-2020420

In practice

Replace the cab filter elements:

•

If the warning light “cab pressure” stays on after the left door has been closed 30 seconds
and the fan is running at maximum speed.

•

According to the interval in this manual (whichever comes first). Refer to



Before spraying:

Turn the ignition on.

The warning light “cab pressure” must come on.

Close the doors.

The warning light “cab pressure” must go off after maximum 30 seconds.

While spraying:

Keep the doors closed.

Increase the fan speed when the warning light “cab pressure” comes on. Replace the filter
elements if the warning light stays on (fan at maximum speed).

Stop spraying at the first indication of chemical odour, taste or irritation.

Summary of Contents for ENDURANCE

























































































































































































Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands

agrifac ENDURANCE, User Manual

Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands