agrifac ENDURANCE User Manual Download Page 120

Page: 120 / 184

MAINTENANCE

120

Endurance2-UM-2018-20-R0-en-2020420

6.29 Wheel gearboxes

Check the oil level after every 200
operating hours.

Change the oil (



) after the first

100–150 operating hours and then
1x per year.

Drain the oil when it is warm. Dis-
pose of the oil in accordance with
the national legislation.

NOTICE

Clean the area around the oil plugs before you remove them.

NOTICE

Contact your dealer if there are metallic parts with unusual dimensions on the
magnetic oil plugs.

NOTICE

Contact your dealer in case of problems. Do not try to repair a defective gear-
box yourself.

WARNING

Turn the engine off (and take the ignition key with you) before leaving the cab.
Use rubber gloves.
The air in the gearbox can be under some pressure. Carefully remove the oil
plugs and let the air escape.

Summary of Contents for ENDURANCE

























































































































































































Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands

agrifac ENDURANCE, User Manual

Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands