agrifac ENDURANCE User Manual Download Page 87

Page: 87 / 184

OPERATION

Endurance2-UM-2018-20-R0-en-2020420

5.26 AddFlow system (option)

Refer to the manual of the AddFlow system.

5.27 Spray boom folding

NOTICE

Prevent damage to the spray boom: stop driving before you fold the spray
boom.

WARNING

Do not unfold or fold the spray boom near power lines.

5.28 After spraying

Procedure:

Clean the inside of the spray tank with the
tank cleaning nozzles.

Rinse the sprayer with clean water.

Clean the suction basket, basket filter, suc-
tion filter element and the pressure filter el-
ements.

Rinse your gloves before you take them off.

Wash your hands and lower arms with soap
and water.

Wash your body and put on clean clothes.

Summary of Contents for ENDURANCE

























































































































































































Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands

agrifac ENDURANCE, User Manual

Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands