agrifac ENDURANCE User Manual Download Page 19

Page: 19 / 184

SAFETY

Endurance2-UM-2018-20-R0-en-2020420

Label

Instruction

Order number

WARNING

Fasten your seat belt.

8461235

WARNING

Falling.

Climbing on and off the machine:

•

Do not jump off the machine.

•

Move the ladder down before leaving the cab.

•

Face the ladder when climbing on and off.

•

Keep 3 points of contact with the ladder and the handrails:

2 hands and 1 foot, 1 hand and 2 feet.

•

Clean the ladder steps and the handrails if necessary.

•

Move the ladder up before driving off.

8461225

WARNING

Working near power lines:

•

Know the height and vertical reach of the machine.

•

Determine a safe working procedure. Consult the power

company.

•

Do not unfold or fold the spray boom near power lines.

•

Keep a safe distance, electrocution can occur without di-

rect contact.

In case of direct contact:
1.  Stay in the cab.
2.  Do not let anyone go near the machine.
3.  Try to lower raised parts, try to drive away.
4.  Call the power company.
5.  Jump off the machine in case of fire: do not use the ladder.

8461237

Summary of Contents for ENDURANCE

























































































































































































Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands

agrifac ENDURANCE, User Manual

Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands