agrifac ENDURANCE User Manual Download Page 5

Page: 5 / 184

Endurance2-UM-2018-20-R0-en-2020420

About this manual

This manual describes the operation and maintenance of the sprayer.

Supplied documentation

•

This manual.

•

The manual of the radio.

•

The manual of the engine.

•

The manual of the observation system (option).

•

The manual of the foam marker (option).

•

The manual of the AddFlow system (option).

•

The SKL test report (depending on the destination country).

•

The JKI test report (Germany).

Availability

This manual must always be present with the sprayer or in the cab.
If you lose this manual, order a new one from your dealer.

Terminology

Machine: the crop sprayer.
Sprayer: the crop sprayer.
Spray product: plant protection product or fertilizer in a commercial packaging.
Spray liquid: spray product diluted with water.

Orientation

Left [1], right [2], front [3] and rear [4].

Summary of Contents for ENDURANCE

























































































































































































Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands

agrifac ENDURANCE, User Manual

Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands