agrifac ENDURANCE User Manual Download Page 118

Page: 118 / 184

MAINTENANCE

118

Endurance2-UM-2018-20-R0-en-2020420

6.27 Spring struts

Agrifac, April 2020.
On your machine, you possibly have the use the
pushbuttons [13] on the armrest (



) to deflate and

to inflate the air springs. This will be changed with the
next software update.

Deflating the
air springs

Inflating the
air springs

Deflate the air springs before you do any maintenance on the spring struts.

Deflating the air springs:

Start the engine.

Simultaneously press the buttons

the armrest for 2 seconds: the machine goes
down.

Inflating the air springs after transport:

Start the engine.

The message

“Vehicle height. In bottom po-

sition. For transport and maintenance only”

appears on the main screen.

Simultaneously press the buttons

the armrest for 2 seconds: the machine goes
up.

The message disappears.

Summary of Contents for ENDURANCE

























































































































































































Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands

agrifac ENDURANCE, User Manual

Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands