agrifac ENDURANCE User Manual Download Page 109

Page: 109 / 184

MAINTENANCE

Endurance2-UM-2018-20-R0-en-2020420

109

6.20 AdBlue filters

WARNING

Use safety goggles. If any AdBlue gets in your eyes: immediately rinse your
eyes with plenty of water. Get medical aid if eye irritation occurs.

AdBlue is not used in case of an uncertified engine (optional for Australia).

Cleaning the filter in the AdBlue filler neck:

Turn the engine off and take the ignition key
with you.

Remove the filler cap [1] and the AdBlue
filter [2].

Put the filler cap and the AdBlue filter in
clean water [3] for at least 5 minutes.

Place the AdBlue filter and the filler cap
back.

Wash your hands with soap and water.

Summary of Contents for ENDURANCE

























































































































































































Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands

agrifac ENDURANCE, User Manual

Search results

Summary of Contents for ENDURANCE

Reviews:

Related manuals for ENDURANCE

Brands by name

Popular brands