Agilent Technologies DSO-X 4022A, User Manual

Page: 391 / 488

CAN/LIN Triggering and Serial Decode
23
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide 391
CAN Serial Decode
To set up the oscilloscope to capture CAN signals, see "Setup for CAN
Signals" on page 387.
To set up CAN serial decode:
1
Press
[Serial]
to display the Serial Decode Menu.
2 If the decode line does not appear on the display, press the [Serial] key
to turn it on.
3
If the oscilloscope is stopped, press the
[Run/Stop]
key to acquire and
decode data.
You can use the horizontal Zoom window for easier navigation of the
decoded data.
See Also
• "Interpreting CAN Decode" on page 392
• "CAN Totalizer" on page 393
• "Interpreting CAN Lister Data" on page 394
• "Searching for CAN Data in the Lister" on page 395
N O T E
To display CAN serial decode, see "CAN Serial Decode" on page 391.
N O T E
For CAN triggering set up see "CAN Triggering" on page 389.
N O T E
If the setup does not produce a stable trigger, the CAN signal may be slow enough that the
oscilloscope is AutoTriggering. Press the [Mode/Coupling] key, then press the Mode
softkey to set the trigger mode from Auto to Normal.