Agilent Technologies DSO-X 4022A, User Manual

Page: 123 / 488

123
Agilent InfiniiVision 4000 X-Series Oscilloscopes
User's Guide
s 1
6
Digital Channels
To connect the digital probes to the device under test 123
Acquiring waveforms using the digital channels 127
To display digital channels using AutoScale 127
Interpreting the digital waveform display 129
To switch all digital channels on or off 130
To switch groups of channels on or off 130
To switch a single channel on or off 130
To change the displayed size of the digital channels 130
To reposition a digital channel 131
To change the logic threshold for digital channels 131
To display digital channels as a bus 132
Digital channel signal fidelity: Probe impedance and grounding 135
To replace digital probe leads 140
This chapter describes how to use the digital channels of a Mixed- Signal
Oscilloscope (MSO).
The digital channels are enabled on MSOX4000 X- Series models and
DSOX4000 X- Series models that have the MSO upgrade license installed.
To connect the digital probes to the device under test
1
If necessary, turn off the power supply to the device under test.