Agilent Technologies DSO-X 4022A, User Manual

Page: 165 / 488

165
Agilent InfiniiVision 4000 X-Series Oscilloscopes
User's Guide
s 1
10
Triggers
Adjusting the Trigger Level 167
Forcing a Trigger 167
Edge Trigger 168
Edge then Edge Trigger 170
Pulse Width Trigger 172
Pattern Trigger 175
OR Trigger 178
Rise/Fall Time Trigger 180
Nth Edge Burst Trigger 182
Runt Trigger 183
Setup and Hold Trigger 186
Video Trigger 187
Serial Trigger 200
Zone Qualified Trigger 201
A trigger setup tells the oscilloscope when to acquire and display data.
For example, you can set up to trigger on the rising edge of the analog
channel 1 input signal.
You can adjust the vertical level used for analog channel edge detection by
turning the Trigger Level knob.
In addition to the edge trigger type, you can also set up triggers on
rise/fall times, Nth edge bursts, patterns, pulse widths, runt pulses, setup
and hold violations, TV signals, and serial signals (if option licenses are
installed).
You can use any input channel or the "External Trigger Input" on
page 210 BNC as the source for most trigger types.