Agilent Technologies DSO-X 4022A, User Manual

Page: 121 / 488

Reference Waveforms
5
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide 121
One reference waveform can be displayed at a time.
Reference waveforms are always drawn as vectors (that is, lines between
waveform data points) and may look different than waveforms drawn as
dots (if that option is available in your oscilloscope).
See Also • "To display reference waveform information" on page 122
To scale and position reference waveforms
1 Make sure the multiplexed scale and position knobs above and below
the
[Ref] key are selected for the reference waveform.
If the arrow to the left of the
[Ref]
key is not illuminated, press the key.
2
Turn the upper multiplexed knob to adjust the reference waveform
scale.
3 Turn the lower multiplexed knob to adjust the reference waveform
position.