Agilent Technologies DSO-X 4022A, User Manual

Page: 347 / 488

Utility Settings
20
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide 347
You can use the original shipping container, or provide your own
materials sufficient to protect the instrument during shipping.
4
Seal the shipping container securely, and mark it FRAGILE.
Configuring the [Quick Action] Key
The
[Quick Action]
key lets you perform common, repetitive actions by
pressing a single key.
To configure the [Quick Action] key:
1 Press [Utility] > Quick Action > Action ; then, select the action that should be
performed:
•
Off
— disables the
[Quick Action]
key.
•
Quick Measure All
— displays a popup containing a snapshot of all the
single waveform measurements. The Source softkey lets you select the
waveform source (which also becomes the source selection in the
Measurement Menu). See
Chapter 14 , “Measurements,” starting on
page 241.
• Quick Print — prints the current screen image. Press Settings to set up
the printing options. See Chapter 19 , “Print (Screens),” starting on
page 323.
• Quick Save — saves the current image, waveform data, or setup. Press
Settings to set up the save options. See Chapter 18 , “Save/Recall
(Setups, Screens, Data),” starting on page 309.
•
Quick Recall
— recalls a setup, mask, or reference waveform. Press
Settings to set up the recall options. See Chapter 18 , “Save/Recall
(Setups, Screens, Data),” starting on page 309.
•
Quick Freeze Display
— freezes the display without stopping running
acquisitions or un- freezes the display if currently frozen. For more
information, see
"To freeze the display" on page 155.
• Quick Trigger Mode
— toggles the trigger mode between Auto and
Normal, see "To select the Auto or Normal trigger mode" on
page 206.
• Quick Clear Display — clears the display, see "To clear the display" on
page 153.