Agilent Technologies DSO-X 4022A, User Manual

Page: 172 / 488

172 Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
10
Triggers
Adjust the trigger level for the selected analog channel by turning the
Trigger Level knob. Press the
[Digital] key and select Thresholds to set
the threshold level for digital channels. The value of the trigger level or
digital threshold is displayed in the upper- right corner of the display.
5
Press the Back/Up key to return to the Trigger Menu.
6 Press the Delay softkey; then, turn the Entry knob to enter the delay
time between the Arm A edge and the Trigger B edge.
7
Press the
Nth Edge B
softkey; then, turn the Entry knob to select the Nth
edge of the Trigger B signal to trigger on.
Pulse Width Trigger
Pulse Width (glitch) triggering sets the oscilloscope to trigger on a positive
or negative pulse of a specified width. If you want to trigger on a specific
timeout value, use
Pattern
trigger in the Trigger Menu (see "Pattern
Trigger" on page 175).
1 Press the [Trigger] key.
2 In the Trigger Menu, press the Trigger softkey; then, turn the Entry knob
to select
Pulse Width
.
Back