Agilent Technologies DSO-X 4022A, User Manual

Page: 318 / 488

318 Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
18
Save/Recall (Setups, Screens, Data)
• A connected USB keyboard.
• A connected USB mouse — you can click anything on the screen that
can be touched.
4
When you are done entering the file name, select the dialog's Enter or
OK key or press the
File Name softkey again.
The file name appears in the softkey.
5 When available, the Increment softkey can be used to enable or disable
automatically incremented file names. Auto increment adds a numeric
suffix to your file name and increments the number with each
successive save. It will truncate characters as necessary when the file
name length is at maximum and more digits are required for the
numeric portion of the file name.
Recalling Setups, Masks, or Data
1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press Recall .
3 In the Recall Menu, press Recall: , then, turn the Entry knob to select
the type of file you want to recall:
•
Setup (*.scp)
— See "To recall setup files" on page 319.
•
Mask (*.msk)
— See "To recall mask files" on page 319.
•
Reference Waveform data (*.h5)
— See "To recall reference waveform files
from a USB storage device" on page 319.
• Arbitrary Waveform data (*.csv) — See "To recall arbitrary waveforms" on
page 320.
You can also recall setups and mask files by loading them using the File
Explorer. See
"File Explorer" on page 333.
You can also configure the
[Quick Action]
key to recall setups, masks, or
reference waveforms. See "Configuring the [Quick Action] Key" on
page 347.