Agilent Technologies DSO-X 4022A, User Manual

Page: 294 / 488

294 Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
17
Waveform Generator
The new waveform is created and the Edit Waveform Points menu is
opened. See
"Editing Existing Arbitrary Waveforms" on page 294.
Note that you can also create a new arbitrary waveform by capturing
another waveform. See
"Capturing Other Waveforms to the Arbitrary
Waveform" on page 299.
Editing Existing Arbitrary Waveforms
Using the
Touchscreen to
Edit Existing
Waveforms
To select a point, touch or drag in the upper, full waveform display:
For fine points selection, touch the previous point or next point arrows:
To adjust the value of a point, drag the voltage level handle up or down:
C A U T I O N
When you create a new arbitrary waveform, the existing arbitrary waveform definition
is overwritten. Note that you can use the [Save/Recall] key and menu to save
arbitrary waveforms to one of four internal storage locations or to a USB storage
device, and you can recall them later. See
"To save arbitrary waveforms" on page 316
and "To recall arbitrary waveforms" on page 320.