Agilent Technologies DSO-X 4022A, User Manual

Page: 213 / 488

213
Agilent InfiniiVision 4000 X-Series Oscilloscopes
User's Guide
s 1
12
Acquisition Control
Running, Stopping, and Making Single Acquisitions (Run Control) 213
Overview of Sampling 215
Selecting the Acquisition Mode 219
Realtime Sampling Option 226
Acquiring to Segmented Memory 228
This chapter shows how to use the oscilloscope's acquisition and run
controls.
Running, Stopping, and Making Single Acquisitions (Run Control)
There are two front panel keys for starting and stopping the oscilloscope's
acquisition system:
[Run/Stop]
and
[Single]
.
• When the
[Run/Stop]
key is green, the oscilloscope is running, that is,
acquiring data when trigger conditions are met.
To stop acquiring data, press [Run/Stop] . When stopped, the last
acquired waveform is displayed.
• When the
[Run/Stop]
key is red, data acquisition is stopped.
"Stop" is displayed next to the trigger type in the status line at the top
of the display.
To start acquiring data, press
[Run/Stop]
.
• To capture and display a single acquisition (whether the oscilloscope is
running or stopped), press
[Single] .