Agilent Technologies DSO-X 4022A, User Manual

Page: 287 / 488

287
Agilent InfiniiVision 4000 X-Series Oscilloscopes
User's Guide
s 1
17
Waveform Generator
To select generated waveform types and settings 287
To edit arbitrary waveforms 291
To output the waveform generator sync pulse 299
To specify the expected output load 300
To use waveform generator logic presets 300
To add noise to the waveform generator output 301
To add modulation to the waveform generator output 302
To restore waveform generator defaults 307
To set up dual channel tracking 307
A waveform generator is built into the oscilloscope. It is enabled by
Option WGN or the DSOX4WAVEGEN2 upgrade. The waveform generator
gives you an easy way to provide input signals when testing circuitry with
the oscilloscope.
Waveform generator settings can be saved and recalled with oscilloscope
setups. See
Chapter 18 , “Save/Recall (Setups, Screens, Data),” starting on
page 309.
To select generated waveform types and settings
1
To access the Waveform Generator Menu and enable or disable the
waveform generator output on the front panel Gen Out BNC, press the
[Wave Gen]
key.
When waveform generator output is enabled, the
[Wave Gen]
key is
illuminated. When waveform generator output is disabled, the [Wave
Gen]
key is off.