Agilent Technologies DSO-X 4022A, User Manual

Page: 387 / 488

387
Agilent InfiniiVision 4000 X-Series Oscilloscopes
User's Guide
s 1
23
CAN/LIN Triggering and Serial Decode
Setup for CAN Signals 387
CAN Triggering 389
CAN Serial Decode 391
Setup for LIN Signals 396
LIN Triggering 397
LIN Serial Decode 399
CAN/LIN triggering and serial decode requires Option AUTO or the
DSOX4AUTO upgrade.
Setup for CAN Signals
Setup consists of connecting the oscilloscope to a CAN signal, using the
Signals Menu to specify the signal source, threshold voltage level, baud
rate, and sample point.
To set up the oscilloscope to capture CAN signals, use the Signals softkey
which appears in the Serial Decode Menu:
1
Press
[Label]
to turn on labels.
2
Press
[Serial]
.
3
Press the
Serial
softkey, turn the Entry knob to select the desired slot
(Serial 1 or Serial 2), and press the softkey again to enable decode.
4 Press the Mode softkey; then, select CAN trigger type.
5 Press the Signals softkey to open the CAN Signals Menu.