ABB FSO-12, User Manual

Page: 312 / 388

312 Parameters
41
SARx Parameters for SARx ramps
SARx.02 SAR initial allowed
range
Sets the initial allowed range for the SARx
ramp. This parameter moves the location of
the maximum monitoring ramp forward on
the time axis, when monitoring is started.
The slope of the ramp stays the same as
defined with parameters
200.202 and
SARx.12 (SAR0) or SARx.22 (SAR1).
For more information, see section Ramp
monitoring on page 49 .
0 ms
0…60,000 ms Time
SARx.11 SAR0 min ramp
time to zero
Sets the minimum ramp time for the SAR0
ramp monitoring. 0 ms
0…1,799,999 ms Time.
Note: With value 0 ms , the ramp is not
monitored
SARx.12 SAR0 max ramp
time to zero
Sets the maximum ramp time for the SAR0
ramp monitoring. 1 ms
1…3,600,000 ms Time
SARx.21 SAR1 min ramp time
to zero
Sets the minimum ramp time for the SAR1
ramp monitoring. 0 ms
0…1,799,999 ms Time
Note: With value 0 ms , the ramp is not
monitored
SARx.22 SAR1 max ramp
time to zero
Sets the maximum ramp time for the SAR1
ramp monitoring. 1 ms
1…3,600,000 ms Time
41
SAFEIO Parameters for FSO inputs and outputs
SAFEIO.11 M/F mode for
cascade
Sets the master/follower mode of the FSO
module for both cascade connections A and
B separately. A = follower,
B = follower
A = follower,
B = follower
The module is a follower on cascade
connection A and a follower on cascade
connection B.
A = master,
B = follower
The module is the master on cascade
connection A and a follower on cascade
connection B.
A = follower,
B = master
The module is a follower on cascade
connection A and the master on cascade
connection B.
A = master,
B = master
The module is the master on cascade
connection A and the master on cascade
connection B.
Index Name/Value Description Factory
default