Start-up and control panel
71
ACH550-01 User's Manual
For detailed hardware description, see chapter
Technical data
.
Note:
The current parameter value appears below the
highlighted parameter.
Note:
To replace the displayed value of a parameter with the
default value, press the UP/DOWN keys simultaneously.
Note:
The most typical and necessary parameters to change are
the following parameter groups:
Group 99: START-UP DATA
,
Group 10: START/STOP/DIR
,
Group 11: REFERENCE
SELECT
,
Group 13: ANALOGUE INPUTS
,
Group 16: SYSTEM
CONTROLS
,
Group 20: LIMITS
,
Group 22: ACCEL/DECEL
,
Group 40: PROCESS PID SET 1
,
Group 41: PROCESS PID
SET 2
and
Group 42: EXT / TRIM PID
.
Note:
To restore the default factory settings, select the HVAC
default application macro.
Modes
The HVAC control panel (operator keypad) has several different
modes for configuring, operating and diagnosing the drive. The
modes are:
•
Output (Standard display) mode
– Shows drive status
information and operates the drive.
•
Parameters mode
– Edits parameter values individually.
•
Assistants mode
– Guides the start-up and configuration.
•
Changed parameters mode
– Shows changed parameters.
•
Drive parameter backup mode
– Uploads or downloads the
parameters between the drive and the control panel.
•
Time and date mode
– Sets the time and date for the drive.
•
I/O settings mode
– Checks and edits the I/O settings.
•
Fault logger mode
– Shows fault history, details and help text
for the fault.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
