1-3
Item
Description
Level
Select an authorization level for the local user,
which can be Visitor, Monitor, Configure, or
Management, in ascending order of priority.
VLAN
Specify the VLAN to be authorized to the local
user after the user passes authentication.
ACL
Specify the ACL to be used by the access device
to restrict the access of the local user after the
user passes authentication.
User-profile
Specify the user profile for the local user.
Currently, switch 2900 series do not support
user-profile configuration.
Every authorization
attribute has its definite
application environments
and purposes. Therefore,
when configuring
authorization attributes
for a local user, determine
what attributes are
needed first.
Configuring a User Group
Select
Authentication
>
Users
from the navigation tree, and then select the
User Group
tab to display
the existing user groups, as shown in
Figure 1-3
. Then, click
Add
to enter the user group configuration
page, as shown in
Figure 1-4
.
Figure 1-3
User group list
Figure 1-4
User group configuration page
Table 1-2
describes the configuration items for configuring a user group.
Summary of Contents for 2928 - Baseline Plus Switch PWR
