1-14
Figure 1-11
Create an ISP domain
Perform the following configurations, as shown in
Figure 1-11
.
z
Enter
test
in the
Domain Name
textbox.
z
Select
Enable
to use the domain as the default domain.
z
Click
Apply
.
# Configure the AAA authentication method for the ISP domain.
z
Select the
Authentication
tab.
Figure 1-12
Configure the AAA authentication method for the ISP domain
Perform the following configurations, as shown in
Figure 1-12
.
z
Select the domain name
test
.
z
Select the
Default AuthN
checkbox and then select
RADIUS
as the authentication mode.
z
Select
system
from the
Name
drop-down list to use it as the authentication scheme.
z
Click
Apply
. A configuration progress dialog box appears, as shown in
Figure 1-13
.
Summary of Contents for 2928 - Baseline Plus Switch PWR
