1-20
Return to
LLDP Configuration Task List
.
Displaying LLDP Information Received from LLDP Neighbors
Select
Network
>
LLDP
from the navigation tree and click the
Neighbor Summary
tab to display the
global LLDP neighbor information, as shown in
Figure 1-13
.
Figure 1-13
The Neighbor Summary tab
Return to
LLDP Configuration Task List
.
LLDP Configuration Examples
LLDP Basic Settings Configuration Example
Network requirements
As shown in
Figure 1-14
, a network management station is connected to Switch A over Ethernet and
Switch A is connected to a MED device and Switch B through ports GigabitEthernet 1/0/1 and
GigabitEthernet 1/0/2 respectively.
Configure LLDP on Switch A and Switch B so that the network management station can determine the
link status of Switch A.
Figure 1-14
Network diagram for basic LLDP settings configuration
Summary of Contents for 2928 - Baseline Plus Switch PWR
