2-4
Configuring ARP Detection
If both the ARP detection based on specified objects and the ARP detection based on static IP-to-MAC
bindings/DHCP snooping entries/802.1X security entries are enabled, the former one applies first, and
then the latter applies.
Select
Network
>
ARP Anti-Attack
from the navigation tree to enter the default
ARP Detection
page
shown in
Figure 2-2
.
Figure 2-2 ARP Detection
configuration page
Table 2-1
describes the ARP Detection configuration items.
Table 2-1
ARP Detection configuration items
Item
Description
VLAN Settings
Select VLANs on which ARP detection is to be enabled.
To add VLANs to the
Enabled VLAN
list box, select one or multiple VLANs from
the
Disabled VLAN
list box and click the
<<
button.
To remove VLANs from the
Enabled VLAN
list box, select one or multiple VLANs
from the list box and click the
>>
button.
Summary of Contents for 2928 - Baseline Plus Switch PWR
