1-1
1
Port Management Configuration
Overview
You can use the port management feature to set and view the operation parameters of a Layer 2
Ethernet port, including but not limited to its state, rate, duplex mode, link type, PVID, MDI mode, flow
control settings, MAC learning limit, and storm suppression ratios.
Configuring a Port
Setting Operation Parameters for a Port
Select
Device
>
Port Management
from the navigation tree, and then select the
Setup
tab on the page
that appears to enter the page as shown in
Figure 1-1
.
Figure 1-1
The
Setup
tab
Summary of Contents for 2928 - Baseline Plus Switch PWR
