1-15
Protocols and Standards
MSTP is documented in:
z
IEEE 802.1d: Spanning Tree Protocol
z
IEEE 802.1w: Rapid Spanning Tree Protocol
z
IEEE 802.1s: Multiple Spanning Tree Protocol
Configuring MSTP
Configuration Task List
Perform the tasks described in
Table 1-7
to configure MSTP.
Table 1-7
MSTP configuration task list
Task
Remarks
Configuring an MST Region
Optional
Configure the MST region-related parameters and VLAN-to-MSTI
mappings.
By default, the MST region-related parameters adopt the default
values, and all VLANs in an MST region are mapped to MSTI 0.
Configuring MSTP Globally
Required
Enable MSTP globally and configure MSTP parameters.
By default, MSTP is enabled globally; and all MSTP parameters
have default values.
Configuring MSTP on a Port
Optional
Enable MSTP on a port and configure MSTP parameters.
By default, MSTP is enabled on a port, and all MSTP parameters
adopt the default values.
Displaying MSTP
Information of a Port
Optional
Display MSTP information of a port in MSTI 0, the MSTI to which the
port belongs, and the path cost and priority of the port.
Configuring an MST Region
Select
Network
>
MSTP
from the navigation tree to enter the page as shown in
Figure 1-6
.
Figure 1-6
MST region
Click
Modify
to enter the page for configuring MST regions, as shown in
Figure 1-7
.
Summary of Contents for 2928 - Baseline Plus Switch PWR
