3-8
Figure 3-8
Configure DHCP snooping functions on GigabitEthernet 1/0/1
z
Click on the
Trust
radio button next to
Interface State
.
z
Click
Apply
.
# Configure DHCP snooping functions on GigabitEthernet 1/0/2.
z
Click the
icon of GigabitEthernet 1/0/2 on the interface list. Perform the following operations on
the
DHCP Snooping Interface
Configuration
page shown in
Figure 3-9
.
Figure 3-9
Configure DHCP snooping functions on GigabitEthernet 1/0/2
z
Click on the
Untrust
radio button for
Interface State
.
z
Click on the
Enable
radio button next to
Option 82 Support
.
z
Select
Replace
for
Option 82 Strategy
.
z
Click
Apply
.
# Configure DHCP snooping functions on GigabitEthernet 1/0/3.
z
Click the
icon of GigabitEthernet 1/0/3 on the interface list. Perform the following operations on
the
DHCP Snooping Interface
Configuration
page shown in
Figure 3-10
.
Figure 3-10
Configure DHCP snooping functions on GigabitEthernet 1/0/3
Summary of Contents for 2928 - Baseline Plus Switch PWR
