1-27
z
Enter 0.0.0.0 in the
Destination Wildcard
text box.
z
Click
Add
to finish the operation.
5) Configure the 802.1X feature
# Enable the 802.1X feature globally.
z
From the navigation tree, select
Authentication
>
802.1X
to enter the 802.1X configuration page.
Figure 1-34
Global 802.1X globally
Perform the following configuration as shown in
Figure 1-34
.
z
Select the check box before
Enable 802.1X
.
z
Select the authentication method as CHAP.
z
Click
Apply
to finish the operation.
# Enable 802.1X on port GigabitEthernet 1/0/1.
z
In the
Ports With 802.1X Enabled
area, click
Add
.
Figure 1-35
802.1X configuration of GigabitEthernet 1/0/1
Summary of Contents for 2928 - Baseline Plus Switch PWR
