1-9
Figure 1-11
SNMP group
Figure 1-12
Create an SNMP group
Table 1-6
describes the configuration items for creating an SNMP group.
Table 1-6
Configuration items for creating an SNMP group
Item
Description
Group Name
Set the SNMP group name.
Security Level
Select the security level for the SNMP group. The available security
levels are:
z
NoAuth/NoPriv: No authentication no privacy.
z
Auth/NoPriv: Authentication without privacy.
z
Auth/Priv: Authentication and privacy.
For an existing SNMP group, its security level cannot be modified.
Read View
Select the read view of the SNMP group.
Write View
Select the write view of the SNMP group.
If no write view is configured, the NMS cannot perform the write
operations to all MIB objects on the device.
Notify View
Select the notify view of the SNMP group, that is, the view that can
send trap messages.
If no notify view is configured, the agent does not send traps to the
NMS.
Summary of Contents for 2928 - Baseline Plus Switch PWR
