2-9
z
In the
Interface Config
field, click the icon of VLAN-interface 1, and then perform the following
operations, as shown in
Figure 2-11
.
Figure 2-11
Enable the DHCP relay agent on an interface and correlate it with a server group
z
Click on the
Enable
radio button next to
DHCP Relay
.
z
Select
1
for
Server Group ID
.
z
Click
Apply
.
Because the DHCP relay agent and server are on different subnets, you need to configure a static route
or dynamic routing protocol to make them reachable to each other.
Summary of Contents for 2928 - Baseline Plus Switch PWR
