1-9
Figure 1-4
Display the information of LACP-enabled ports
The upper part of the page displays a list of all LACP-enabled ports on the device and information about
them. To view information about the partner port of a LACP-enabled port, select it in the port list, and
then click
View Details
. Detailed information about the peer port will be displayed on the lower part of
the page.
Table 1-7
describes the fields on the
Summary
tab.
Table 1-7
Fields in the LACP-enabled port summary table
Field/button
Description
Unit
The ID of a device in a stack
Port
Port where LACP is enabled
LACP State
State of LACP on the port
Port Priority
LACP priority of the port
State
Active state of the port. If a port is selected, its state is active and the ID of
the aggregation group it belongs to will be displayed.
Summary of Contents for 2928 - Baseline Plus Switch PWR
