1-16
# Configure the RADIUS authentication servers.
z
From the navigation tree, select
Authentication
>
RADIUS
. The RADIUS server configuration
page appears.
Figure 1-15
RADIUS authentication server configuration
Perform the following configurations as shown in
Figure 1-15
.
z
Select
Authentication Server
as the server type.
z
Enter the primary server IP address 10.1.1.1.
z
Select
active
as the primary server’s status.
z
Enter the secondary server IP address 10.1.1.2.
z
Select
active
as the secondary server’s status.
z
Click
Apply
.
# Configure the RADIUS accounting servers.
Figure 1-16
RADIUS accounting server configuration
Perform the following configurations as shown in
Figure 1-16
:
z
Select
Accounting Server
as the server type.
z
Enter the primary server IP address 10.1.1.2.
z
Select
active
as the primary server’s status.
Summary of Contents for 2928 - Baseline Plus Switch PWR
