3Com 2928 - Baseline Plus Switch PWR, User Manual

Page: 149 / 505

1-8
Figure 1-9
Configure an SNMP community
Figure 1-10
Create an SNMP Community
Table 1-5 describes the configuration items for configuring an SNMP community.
Table 1-5
Configuration items for configuring an SNMP community
Item Description
Community Name Set the SNMP community name.
Access Right
Configure SNMP NMS access right
z
Read only: The NMS can perform read-only operations to the MIB objects
when it uses this community name to access the agent,
z
Read and write: The NMS can perform both read and write operations to
the MIB objects when it uses this community name to access the agent.
View
Specify the view associated with the community to limit the MIB objects that
can be accessed by the NMS.
ACL
Associate the community with a basic ACL to allow or prohibit the access to
the agent from the NMS with the specified source IP address.
Return to
SNMPv1 or SNMPv2c configuration task list .
Configuring an SNMP Group
Select
Device
>
SNMP
from the navigation tree, then click the
Group
tab to enter the page as shown in
Figure 1-11 . Click
Add
to enter the
Add SNMP Group
page as shown in Figure 1-12 .