1-13
Displaying RMON Event Logs
Select
Device
>
RMON
from the navigation tree and click the
Log
tab to enter the page, as shown in
Figure 1-11
, which displays log information for all event entries.
Figure 1-11
Log
Return to
Display RMON running status
.
RMON Configuration Example
Network requirements
As shown in
Figure 1-12
, Agent is connected to a remote NMS across the Internet. Create an entry in
the RMON Ethernet statistics table to gather statistics on Ethernet 1/0/1, and perform corresponding
configurations so that the system will log the event when the number of bytes received on the interface
exceed the specified threshold.
Figure 1-12
Network diagram for RMON
Configuration procedure
# Configure RMON to gather statistics for interface Ethernet 1/0/1.
z
Select
Device
>
RMON
from the navigation tree to enter the page of the
Statistics
tab. Click
Add
and perform the following configurations, as shown in
Figure 1-13
.
Summary of Contents for 2928 - Baseline Plus Switch PWR
