1-3
Table 1-2
Configuration items of creating a mirroring group
Item
Description
Mirroring Group ID
ID of the mirroring group to be created
Type
Specify the type of the mirroring group to be created:
z
Local
: Creates a local mirroring group.
Return to
Local port mirroring configuration task list
.
Configuring Ports for a Mirroring Group
Select
Device
>
Port Mirroring
from the navigation tree and click
Modify Port
to enter the page for
configuring ports for a mirroring group, as shown in
Figure 1-3
.
Figure 1-3
The Modify Port tab
Table 1-3
describes the configuration items of configuring ports for a mirroring group.
Table 1-3
Configuration items of configuring ports for a mirroring group
Item
Description
Mirroring
Group ID
ID of the mirroring group to be configured
The available groups were created previously.
Port Type
Set the type
of the port to
be
configured
Configure ports for a local mirroring group:
z
Monitor Port
: Configures the monitor ports for the local
mirroring group.
z
Mirror Port
: Configures mirroring ports for the local mirroring
group.
Summary of Contents for 2928 - Baseline Plus Switch PWR
