1-5
Return to
IPv4 ACL configuration task list
.
Creating an IPv4 ACL
Select
QoS
>
ACL IPv4
from the navigation tree and then select the
Create
tab to enter the IPv4 ACL
configuration page, as shown in
Figure 1-2
.
Figure 1-2
The page for creating an IPv4 ACL
Table 1-5
describes the configuration items for creating an IPv4 ACL.
Table 1-5
IPv4 ACL configuration items
Item
Description
ACL Number
Set the number of the IPv4 ACL.
Match Order
Set the match order of the ACL. Available values are:
z
Config
: Packets are compared against ACL rules in the order that the
rules are configured.
z
Auto
: Packets are compared against ACL rules in the depth-first
match order.
Return to
IPv4 ACL configuration task list
.
Configuring a Rule for a Basic IPv4 ACL
Select
QoS
>
ACL IPv4
from the navigation tree and then select the
Basic Setup
tab to enter the rule
configuration page for a basic IPv4 ACL, as shown in
Figure 1-3
.
Summary of Contents for 2928 - Baseline Plus Switch PWR
