3Com 2928 - Baseline Plus Switch PWR, User Manual

Page: 243 / 505

1-6
Figure 1-1
Create a link aggregation group
Table 1-4 describes the configuration items of creating a link aggregation group.
Table 1-4
Configuration items of creating a link aggregation group
Item Description
Enter Link Aggregation Interface
ID
Assign an ID to the link aggregation group to be created.
You can view the result in the
Summary
list box at the bottom
of the page.
Specify Interface Type
Set the type of the link aggregation interface to be created:
z
Static (LACP Disabled)
z
Dynamic (LACP Enabled)
Select port(s) for the link
aggregation interface
Select one or multiple ports to be assigned to the link
aggregation group from the chassis front panel.
You can view the result in the
Summary
list box at the bottom
of the page.
Return to
Static aggregation group configuration task list .
Return to Dynamic aggregation group configuration task list .