1-16
After the above configuration, make sure that the system clock of the Switch is synchronous to that of
the CA, so that the Switch can request certificates and retrieve CRLs properly.
2) Configure
Switch
# Create a PKI entity.
z
Select
Authentication
>
PKI
from the navigation tree. The PKI entity list page is displayed by
default. Click
Add
on the page, as shown in
Figure 1-16
, and then perform the following
configurations as shown in
Figure 1-17
.
Figure 1-16
PKI entity list
Figure 1-17
Configure a PKI entity
z
Type
aaa
as the PKI entity name.
z
Type
ac
as the common name.
z
Click
Apply
.
# Create a PKI domain.
z
Select the
Domain
tab, and then click
Add
, as shown in
Figure 1-18
, and then perform the
following configurations as shown in
Figure 1-19
.
Summary of Contents for 2928 - Baseline Plus Switch PWR
